Wawasan Professional Training Centre
Construction | Engineering | Management | Information Technology
E001 Engineering Practical Design, Installation & Testing of Driven piles, Bored piles and Micropiles.

6 CPD Points (BEM) RM 290.00 for Graduate Engineer
RM 350.00 for Professional Engineer
Who are the speakers?
Qualification : Bachelor of Engineering, BE (HONS), Civil, University of Malaya, 1974.
Professional Engineer, Civil, Board of Engineers Malaysia (BEM), 1979
Member, Civil, The Institution of Engineers Malaysia (IEM), 1979
Member, Civil, The Institution of Civil Engineers (UK), 1979
Fellow, Civil, The Institution of Engineers Malaysia, 1992
BEM Accredited Independent Check Engineer, Board of Engineers Malaysia, 2004
ACEM/IEM Panel of Engineering Experts (Geotechnical), 2002
-Life Member, Road Engineering Association Malaysia, 1995

Strength : Published more than 50 technical papers about geotechnical and road engineering in various local and international conferences/seminars/journal.
Current job : Director of E-Geo Consultant Sdn. Bhd.
Biodata : Ir. Neoh has been a Vice Chairman of IEM (2004-2006), Chairman of Technical Committee on Geotechnics (TC5)of Road Association of Malaysia (1997-2006) and Chairman of IEM Geotechnical Technical Division (1996-1998),etc.

He joined JKR Malaysia for 25 years after graduated from UM in 1974. He joined IKRAM Runding Sdn Bhd as Director from 1999 to 2000. Since 2001, he is the Director of E-GEO Consultant Sdn Bhd.

He has published more than 50 technical papers about geotechnical and road engineering in various local & international conferences/seminars/journal.

He is a registered BEM Accredited Independent Checker (Geotechnical).
Sessions and Scopes
Session Scope Speaker
Session 1
Day 1
Session 2
Day 1
Introduction to seminar/course outline, purpose, objectives & speaker
Session 3
Day 1
• Practical design & construction methods plus the necessary QC tests to verify and to validate the important design parameters, structural integrity and performance for various common pile types will be discussed and illustrated with case histories and examples
Ir. Neoh Cheng Aik
Session 4
Day 1
Session 5
Day 1
• Pile capacity estimation methods by various static formulas, driving formulas, high strain dynamic test method and various common pile tests to estimate capacity and structural integrity will be presented with particular reference to limitations and applications.
• Methods of assessment of handling, installation and service stresses of driven piles will be presented with examples.
Ir. Neoh Cheng Aik
Session 6
Day 1
Session 7
Day 1
• What can go wrong in design, construction & testing of piles plus the suggested precautions and mitigations will also be presented with case histories to stimulate awareness among the participants about the need of design checklist and good engineering practice.
Ir. Neoh Cheng Aik
Session 8
Day 1
Session 9
Day 1
• Some typical worked design examples to illustrate pile design procedure to estimate pile axial & lateral capacity, group efficiency/effect, negative friction & settlement/deformation will be illustrated. *bull; Commonly asked practical questions & answers will also be included).
Ir. Neoh Cheng Aik
Session 10
Day 1
Question & answer
Session 11
Day 1
Distribution of Certificate
Date, Time, Venue, and Fee
Date and time : 30-06-2007 (Saturday) 0830 - 1730
Venue : Seminar Hall,1st Floor, Wisma Wawasan,
Address No.19-1, Jalan PJS8/12, Dataran Mentari,
Bandar Sunway, 46150 Petaling Jaya,
Selangor Darul Ehsan
Location map : See location map
Fee : RM 290.00 for Graduate Engineer
RM 350.00 for Professional Engineer
Who should attend?
• Civil Engineer
• Geotechnical Engineer
• Structural Engineer
• Building Contractor
• Consultant
• Project Manager
• SO
Course related information (FREE)
Additional notes
• CPD Points to be applied
• Certificate of attendance
• 2 tea breaks & 1 lunch provided
• Handout notes and souvenir provided
Sorry, this class is full. Class capacity = 60